LLDPE 118NJ is a linear low density polyethylene resin produced by copolymerization butene and ethylene. It is classified as a TNPP-free resin used for general purpose applicati...
Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used for injection moulding applications. It exhibits an outstanding balance of mechanical properties c...
PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water...
BC112 is a crystalline, high molecular weight thermoplastic polymer made by continues melt-phase polymerization process followed by solid-state polymerization.
Due to it...
PP 528K is formulated with an advanced nucleating additive and was specially developed for in-line and off-line thermoforming applications. PP528K encompasses the following feat...
FY4012E is a polypropylene homopolymer intended for yarn extrusion. Yarn made from this resin exhibits high strength tape and low shrinkage.
218 series resins are Linear Low Density Polyethylene grades suitable for general purpose packaging. They are easy to process giving good tensile properties, impact strength and...
FS2011E is a polypropylene homopolymer intended for the extrusion of biaxially oriented film. It is easy to process and suitable for metallization. The film made from this resin...
SPVC67S is a free flowing vinyl chloride homopolymer grade produced by suspension polymerization. Given its modest melt viscosity a...
HGX 030 is Polypropylene Homopolymer, Raffia Grade.
PP 575P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability and high gloss in the products...
100 Black is a High Density Polyethylene, black colored resin. The product is classified as PE 100 and provides excellent environmental stress crack resistance properties (ESCR)...
Provisional - PP random co-polymer for Injection moulding QR6701K is specially developed for producing injection molded & ISBM articles with very high clari...
FY3011E is a polypropylene homopolymer intended for yarn extrusion characterized by ease of processing and low heat shrinkage. Yarn made from this resin exhibit excellent mechan...
Y101 is a polypropylene homopolymer intended for injection molding applications. Molded parts made from this resin exhibit high stiffness, good heat resistance and good flow cha...
FY2011E is a polypropylene homopolymer intended for yarn extrusion. Yarn made from this resin exhibits excellent mechanical properties.
LLDPE M500026 is a linear low density polyethylene resin recommended for injection molding applications due to its narrow molecular weight distribution. It provides excellent fl...
PP AV161 is a polypropylene block copolymer formulated with nucleating agent and intended for general-purpose injection molding. Injection molding parts made from this re...
AR564 is a polypropylene block copolymer intended for industrial applications. It has a medium melt flow and is formulated with nucleating agent to enhance the stiffness. Inject...
AR764 is a polypropylene block copolymer intended for industrial applications. It has a medium melt flow and formulated with nucleating agent and anti-static. Injection molding...
AZ564G is a polypropylene block copolymer intended for industrial & thin wall applications. It has a high melt flow and is formulated with nucleating agent. Injection moldin...
PP AZ764 is a polypropylene block copolymer intended for industrial & thin wall applications. It has a high melt flow and is formulated with nucleating agen...
Pellets of polypropylene are suited for injection moulding.
HDPE F01552 is a medium molecular weight high density polyethylene specifically designed for blown film extrusion. It has a broad molecular weight with excellent extrudability a...
Key Characteristics
• Good flow properties, High Stiffness, easy processing
• Food contact approval for specific applicatio...
LLDPE 218 is a butene Linear Low Density Polyethylene grade with excellent thermal stability at high processing temperatures used in cast film manufacturing. This resin is easy...
LLDPE 318B is a linear low density polyethylene resin that produces films with good tear strength, puncture resistance, and optical properties. It p...
HP4023W is Low Density Polyethylene grade suitable for producing general-purpose films and contains slip and antiblock additives. It gives excellent processability and optical p...
HDPE M80064 is a high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is intended for use in injection moulding applications where...
M200026 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give excellent fl...
B2555 is a medium molecular weight high density polyethylene resin used for blow molding. Blow molded parts made from this resin exhibit high stiffness, good impact strength and...
This high molecular weight, hexene copolymer is tailored for blown film applications that require:
• Soft feel
• Good toughness, impact strength and te...
F0554 is a high molecular weight high density polyethylene resin designed for blown film applications. This resin has broad molecular weight distribution that makes it easier to...
This high molecular weight, hexene copolymer is tailored for lightweight blow molded containers that:
- Require excellent stiffness
- Require exceptional process...
This extra high molecular weight, hexene copolymer is tailored for large blow moulded and thermoformed parts that:
- Require good melt strength
- Require good ri...
This high molecular weight, hexene copolymer is tailored for blown film applications that require: - Toughness and durability - Good processability - Good blen...
LD 0725N can be easily processed on all types of extruders designed for polyethylene. The melt temperature is suggested to be in the range of 170 – 220°C. Excellent pr...
LDPE 4025 is a Low Density Polyethylene easily processed on all types of extruders designed for polyethylene. The melt temperature is suggested to be in the ran...
LD 1925AS is a Low Density Polyethylene with a Melt Flow Rate of 1.90 g/10min (190°C/2.16 kg). It is mainly recommended for shrink film applications. It contains both slip a...
LLDPE FS350A is a linear low density polyethylene easy to process grade with excellent flow properties. It is designed for cast film applications and produces films with good du...
Sepchem 2 MFI is designed to offer a good balance of optical and mechanical properties.
HP2022 series resins are Low Density Polyethylene grades suitable for general purpose packaging. They exhibit better draw down, good opticals and mechanical properties.
HP0323N is Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip and antiblock additives. It gives outstanding toughness and optical p...
FS253S is a linear low density polyethylene resin designed for blown film applications. This resin has a relatively high MFR that makes it an easy processing material. Films mad...
LDPE FS153S is a low density polyethylene linear grade that produces films with outstanding transparency, impact resistance, and toughness. Made for blown film applications.
LLDPE FS150A is a low density polyethylene linear grade used to produce films with good impact resistance, transparency, and toughness. Recommended for blown film applications.<...
SABIC® HP2023 series resins are Low Density Polyethylene grades suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties...
HP0322N is Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip and antiblock additives. It gives outstanding toughness and optical p...
LLDPE R50035 is a linear low density polyethylene grade that offers outstanding mechanical characteristics, stress cracking resistance, with high rigidity, toughness, and minima...
LLDPE R50035E is a linear low density polyethylene copolymer grade with high stiffness, toughness, gloss, and very little warpage. The resin offers outstanding mechanical proper...
HP0722N is Low Density Polyethylene grade suitable for producing medium duty films and contains no slip and antiblock additives. It gives good toughness and optical properties i...
PP H3030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. TASNEE
PP H3030 is designed for Bi-axial Oriented Polypropylene (BOPP) film applicati...
TASNEE LD 0725N is a Low Density Polyethylene with a Melt Flow Rate of 0.75 g/10min (190°C/2.16kg).
TASNEE LD 0725N is an additive free grade and mainly recommended...
HD F0455 is a High Density Polyethylene resin which possesses an outstanding combination of stiffness and impact performance. This grade can be processed on blown film lines at...
BC212 is a crystalline, high molecular weight thermoplastic polymer made by continues melt-phase polymerization process followed by solid-state polymerization. BC212 is speciall...
LLDPE 1210P is a butene linear low density polyethylene with good sealing performance and processability. It offers excellent color stability and optics. Recommended for general...
BorSafe HE3490-LS is a black, bimodal, high density polyethylene classified as a MRS 10.0 material (PE100) produced by the advanced Borstar technology. Well dispersed carbon bla...
LLDPE Off Grade - Jumbo Bags
Appearance : White powder
Average Polymerization : 1042
Impurity particle number/100G : 18
Volatile Matter : 0.19%
Bulk Density(G/ML) : 0.56
F00952 is a high molecular weight, high density polyethylene copolymer which has a broad molecular weight distribution. The design of the product, molecular architecture and den...
M200056 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow proper...
B4660 grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness a...
LLDPE M200024 is a linear low density polyethylene copolymer grade with a narrow molecular weight distribution. It is an injection molding resin designed for applications requri...
Features
• Fast cycling & easy flow characteristics
• Excellent mold release properties
LLDPE 1050P is linear low density polyethlyene is a copolymer resin of butene and ethylene. This grade is made to be used in cast extrusion.
LLDPE 1220P is a butene linear low density polyethylene designed for applications of general blown film extrusion. It offers excellent processing capabilities, colour stability,...
Recycled HDPE (polyethylene) is designed for extrusion.
Recycled PE (polyethylene) has good mechanical properties.
Recycled PE (polyethylene) pellets are perfect for injection applications.
Pellets of polyethylene can be used for blown-film extrusion.
M8060 is a high density polyethylene resin used for injection molding. It has good flow characteristics that make it easier to process. Injection molding parts made from this re...
General purpose polystyrene PS 125 is manufactured by continuous mass polymerization of styrene monomer. It is a crystal-like, hard and brittle polymer; medium...
PP 570P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability, good mechanicals and high glo...
LLDPE 1221P is a butene Linear Low Density Polyethylene with good optics, colour stability, and processability. Designed for general cast extrusion film applications.
Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles (e.g., ropes, thermal...
P6006 is black compound high density (class MRS 10 - PE 100) Polyethylene with bimodal distribution of molecular mass. It is specifically designed for pressure Pipe applications...
PS 330 is a high impact polystyrene with good physical characteristics, opaque colour, and high heat deflection temperature. It is manufactured by mass po...
• Food contact approval for specific applications (refer...
• Excellent anti-blocking properti...
Key Characteristics • Good flow properties, High Stiffness • Food contact approval for specific applications (...
• Medium-High fluidity
Key Characteristics • Organoleptically suitable for food c...
AW564 is a polypropylene block copolymer intended for industrial application. It is formulated with nucleating agent to enhance the stiffness. Injection molding parts made from...
PP 500P is a medium flow, multipurpose grade for extrusion and injection moulding applications.
Pellets of Recycled PP are suitable for injection processing
PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization....
100 Blue is a High Density Polyethylene, blue colored resin. The product is classified as PE 100 and provides excellent environmental stress crack resistance properties (ESCR) c...
PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min.
PP H4120 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 12 g/10min. PP H4120 has good gloss, excellent flow and good mechanical properties.
100 Orange is a High Density Polyethylene, orange colored resin. The product is classified as PE 100 and provides excellent environmental stress crack resistance properties (ESC...
PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system...
HD B1258 is a High Density Polyethylene with an excellent combination of stiffness and environmental stress crack resistance (ESCR). It is delivered in pellet form.
NPP Black is a High Density Polyethylene, black colored resin. It has high melt viscosity, it is an appropriate resin for extrusion of non pressure pipes.
PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using PP 520L has followin...
PVC Powder Scrap - Jumbo Bags
HDPE B5429 is medium molecular weight high density polyethylene copolymer. It is typically used for blow moulding bottles of small sizes. SABIC® HDPE B5429 offers very good...
PP & PE Floor Sweep Scrap - Jumbo Bags
PET Resin Chips - Water Bottle Grade
PP Off Grade - Jumbo Bags
BD PP Powder - Jumbo Bags
PP Recycle Clear - Jumbo Bags
LDPE Recycle Color - Jumbo Bags
PET Lumps - Jumbo Bags
