Products

POLYPROPYLENE (PP)

POLYPROPYLENE (PP)


Polypropylene Homopolymer - (PPH)


H1045

PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water...

FS2011E

FS2011E is a polypropylene homopolymer intended for the extrusion of biaxially oriented film. It is easy to process and suitable for metallization. The film made from this resin...

PP528K

PP 528K is formulated with an advanced nucleating additive and was specially developed for in-line and off-line thermoforming applications. PP528K encompasses the following feat...

PP575P

PP 575P is specially developed for producing rigid injection molding articles for general purpose applications. It gives consistent processability and high gloss in the products...

QR6701K

Provisional - PP random co-polymer for Injection moulding QR6701K is specially developed for producing injection molded & ISBM articles with very high clari...

FY3011E

FY3011E is a polypropylene homopolymer intended for yarn extrusion characterized by ease of processing and low heat shrinkage. Yarn made from this resin exhibit excellent mechan...

FY4012E

FY4012E is a polypropylene homopolymer intended for yarn extrusion. Yarn made from this resin exhibits high strength tape and low shrinkage.

FY2011E

FY2011E is a polypropylene homopolymer intended for yarn extrusion. Yarn made from this resin exhibits excellent mechanical properties.

Y101

Y101 is a polypropylene homopolymer intended for injection molding applications. Molded parts made from this resin exhibit high stiffness, good heat resistance and good flow cha...

Teldene H08ML

Key Characteristics

• Good flow properties, High Stiffness, easy processing

• Food contact approval for specific applicatio...

H4120

PP H4120 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 12 g/10min. PP H4120 has good gloss, excellent flow and good mechanical properties.

H2245

PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system...

H2250

PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization....

Teldene H12ML

Key Characteristics

•  Good flow properties, High Stiffness
•  Food contact approval for specific applications (...

PP H1030

PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min.

PP 500P

PP 500P is a medium flow, multipurpose grade for extrusion and injection moulding applications.

Teldene H17ML

Key Characteristics

 Medium-High fluidity

Teldene-H11BF

Key Characteristics

 Excellent anti-blocking properti...

Teldene H06ML

Key Characteristics

• Good flow properties, High Stiffness, easy processing

• Food contact approval for specific applications (refer...

H3030

PP H3030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3.0 g/10min. TASNEE

PP H3030 is designed for Bi-axial Oriented Polypropylene (BOPP) film applicati...

PP 520L

PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using PP 520L has followin...

Impact Copolymer Polypropylene - (ICP)


Moplen EP548S

Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used for injection moulding applications. It exhibits an outstanding balance of mechanical properties c...

Polypropylene Random Copoylmer (PPRC)


Teldene R40MLT

Key Characteristics  Organoleptically suitable for food c...